Welding

111 readers

1 users here now

founded 2 years ago

MODERATORS

Three_word_reply

Testing an auto darkening welding helmet (self.welding)

submitted 1 year ago by code to c/welding

5 comments fedilink hide all child comments

I'm going to learn some welding and I've bought myself an auto darkening helmet. I tested it my holding it up to the sun, and it darkens, but stops darkening right away (depending on the delay I set). Also tried with a powerful flashlight and it does the same. Also left it outside for a while for the solar panel to maybe charge the battery, no dice. Is my helmet is defective or is it going to work as intended with real welding?

you are viewing a single comment's thread
view the rest of the comments

[–] dack 2 points 1 year ago (1 children)

I'm also new to welding, tried to test my helmet with the sun, and had the same result. However, I found that it does indeed stay dark while running a TIG arc. So I think you will probably find it's fine if you test with an actual arc.

Also, the solar panel does not charge the batteries. The batterries should be replaced if the are low/dead.

[–] BadAdvice 1 points 1 year ago

Depends on the lens. Some have replaceable batteries. Some don't. Some do solar charge. Most don't. There's a wide world of crap hoods out there. For staring at the sun, what you want is a fixed shade. Honestly, learning to weld with a fixed shade isn't the worst idea in the world. Teaches you hood discipline, which is useful in a shop environment.