this post was submitted on 07 Mar 2025
290 points (99.7% liked)
In Person Activism
244 readers
381 users here now
"Power wants your body softening in your chair and your emotions dissipating on the screen. Get outside. Put your body in unfamiliar places with unfamiliar people. Make new friends and march with them." -Tim Snyder
A community for sharing information about ways to get involved with real world activism to make the world a better place.
Spend less time arguing about politics on the internet. The world is in trouble. Get out there and try to help.
founded 1 year ago
MODERATORS
you are viewing a single comment's thread
view the rest of the comments
view the rest of the comments
Even easier is grasp the lightbulb by the metal base with the glass down and the center connector facing up. Smack that center connector with a heavy spoon or light hammer and it will shatter the porcelin and center support. Leaving you a hollow light bulb with a hole in the end. Takes some practice but super easy once you get the hang of it. It also leaves the threaded base intact so you can seal it with a bottle cap and tape instead of messing with wax.
2 problems here. 1. Plexiglass is resistant to common chemical glass etching solutions. 2. Those solutions contain some nasty chemicals and acids, FAR from harmless. Might as well be flinging battery acid or drain cleaner at that point.
I was just thinking, how is anything that can eat into glass not going to be corrosive to skin?
something something organic chemistry something something properties of silica?