22
i had this idea of individually sleeving my cables, but then i found this when i cut off the existing heatshrink.
(lemmy.world)
The main idea i had was to individually sleeve these and potentially remove the split part as i don't like the idea of buying extensions and stuff even more cable inside my case.
On the other hand i would be ok with removing the combined sleeve and 3d print some combs to make the cables look better, especially since the mobo cable has a huge piece of heatshrink making it nearly impossible to look good.
But i have no clue what that little component is and if it only exists for the split that is in the cable.
It's either a signal filter or more likely a power stabilizer to handle fast load spikes when the device suddenly changes power usage levels.
I've learned the hard way that every ttl chip gets it's own cap between vcc and ground.