Technology

60393 readers

3417 users here now

This is a most excellent place for technology news and articles.

Our Rules

Follow the lemmy.world rules.
Only tech related content.
Be excellent to each another!
Mod approved content bots can post up to 10 articles per day.
Threads asking for personal tech support may be deleted.
Politics threads may be removed.
No memes allowed as posts, OK to post as comments.
Only approved bots from the list below, to ask if your bot can be added please contact us.
Check for duplicates before posting, duplicates may be removed

Approved Bots

founded 2 years ago

MODERATORS

L3s

enu

technopagan

273

Physical Media Is Dead, Long Live Physical Media (hackaday.com)

submitted 2 days ago by mesamunefire to c/technology

52 comments fedilink hide all child comments

you are viewing a single comment's thread
view the rest of the comments

[–] grue 3 points 2 days ago (1 children)

1st thing i would do would be call the radio station–they might have a digital copy already

It hasn't existed since 2003 (there's still a station on that frequency, but it's changed ownership and programming a couple of times). Maybe they still have the old master copies anyway? Or I suppose I could try to track down the DJs who produced it...

The library and state archives ideas are good suggestions; I'll look into them.

last resort would be a recording studio, which might cost lots of money per hour, and it’ll have to be converted in real time–play the tape from start to finish, while the computer ‘records’ it. if the studio don’t have a top of the line gourmet tape deck, then they can take just take the output of your own player and plug it into protools

I mean, if using my own player might be considered "good enough," couldn't I just hook my Walkman's headphone output to the line in or mic input on my computer and do it myself? In addition to the audio built into the motherboard, I also have a relatively-cheap USB audio interface, which I guess isn't as good as it could be (it's 48KHz, not 192KHz) but would still be better than nothing.

The main thing is I'm not sure how I need to set the volume on the Walkman (it also apparently has a feature called "AVLS" that might or might not be relevant) or if I need an amplifier or something. I also don't know if I need to do anything special with ALSA/JACK/PulseAudio and know basically nothing about how to use Ardour or XMMS (I'm aware they exist and are the right type of software, but that's about it).

[–] [email protected] 2 points 1 day ago* (last edited 1 day ago)

if using my own player might be considered “good enough,” couldn’t I just hook my Walkman’s headphone output to the line in or mic input on my computer and do it myself?

absolutely, i was responding to your question

any advice on what I should do to get the best quality transfer that I can?

other users have mentioned you can get a converter online, but the "you get what you pay for" maxim applies to electronics maybe more than anything else. the difference in quality between "consumer" and "professional" audio gear is getting narrower, but it's still there-- everything just depends on how much you want to spend

not sure how I need to set the volume on the Walkman

if the walkman has a "line out" port, you'd use that to plug into your "line in" on your recording device. you can use the headphone jack, but that signal is already amplified, so you'll have to adjust the output volume to where the input meter is the highest it can be without ever clipping (going 'red'). older consumer gear will have more noise (hiss) than anything professional. especially an amplified signal, as in a headphone jack. and that's where the money for pro stuff goes--lower noise floor. more information

edit: on a whim i did some looking and found this lol

you could just buy that, dump the recording down to a SD card, and then return the device the next day. done.
i had no idea they made such things, but i haven't really kept up with the music/audio industry since i left