this post was submitted on 31 Dec 2024
13 points (93.3% liked)

Buildapc

4039 readers
2 users here now

founded 2 years ago
MODERATORS
 

I have an Athlon 3000G (YD3000C6FHBOX/YD3000C6M2OFH) I'm trying to pair with a Gigabyte AB350M-DASH.

I've assembled the pair, connected to a 750W PSU, but I get no video signal output. The system doesn't POST, nor does it return any error signal.

It isn't a RAM error issue as the system doesn't change behaviour with or without the stick.

Can anyone offer some suggestion on this issue? I'm already considering buying an error code external reader, as the board seems to have a dedicated por for it.

you are viewing a single comment's thread
view the rest of the comments

https://www.gigabyte.com/Motherboard/GA-AB350M-DASH-rev-10/support#support-cpu

As the other comment said, your board supports your CPU, but only after bios F40, which came out Jun 14, 2019. If your board was made before (or around) that date then you'd need to do a bios update with an older supported CPU first to make sure it's updated.

The board has a buzzer so does it beep? You can find the manual on that same page, look up the beep codes. But CPU dead, CPU unsupported, completely fucked RAM can all show up as the same error.