Linux

48655 readers

1908 users here now

From Wikipedia, the free encyclopedia

Linux is a family of open source Unix-like operating systems based on the Linux kernel, an operating system kernel first released on September 17, 1991 by Linus Torvalds. Linux is typically packaged in a Linux distribution (or distro for short).

Distributions include the Linux kernel and supporting system software and libraries, many of which are provided by the GNU Project. Many Linux distributions use the word "Linux" in their name, but the Free Software Foundation uses the name GNU/Linux to emphasize the importance of GNU software, causing some controversy.

Rules

Posts must be relevant to operating systems running the Linux kernel. GNU/Linux or otherwise.
No misinformation
No NSFW content
No hate speech, bigotry, etc

Related Communities

Community icon by Alpár-Etele Méder, licensed under CC BY 3.0

founded 5 years ago

MODERATORS

[email protected]

Issues with HDMI output (slrpnk.net)

submitted 1 month ago by [email protected] to c/[email protected]

12 comments fedilink hide all child comments

I have a thinkpad T480 with LMDE and up until about two months ago it would work with this Samsung commercial display TV, although it never played audio from the TV like it was supposed to.

Now when I plug in the HDMI cable the screen turns black (not blue, which is when there's no signal). If I go into display it shows that the TV is connected.

I know that this isn't a hardware issue because I've used the same HDMI cable and laptop on a different TV and it worked fine. xrandr also says that HDMI-2 is connected.

Help

you are viewing a single comment's thread
view the rest of the comments

[–] [email protected] 3 points 1 month ago (1 children)

@countrypunk @linux I've had similar issues that I've attributed to me using i3, but the fix might work for you. Run 'xrandr' and find the name of your TV output (I see yours is HDMI-2), and then run 'xrandr --output HDMI-2 --auto'. That should make the screen work. If audio still isn't working and you use pulseaudio, open 'pavucontrol' (graphical program for changing audio settings, recommend downloading it if you don't have it). You can probably find a command that does the same thing with just 'pactl', but 'pavucontrol' will be way easier. On the tab for configuration/options, you'll have a drop down for audio output settings. Change it to something that has HDMI in the name, and that might fix it. I have a T490 and this has always been an issue for some reason, but the above steps get the display working and audio routed. Hopefully my fix works for you!

[–] [email protected] 1 points 1 month ago

So the xrandr auto command didn't do anything. I downloaded pavucontrol and selected the HDMI configuration. It says that it's plugged in and that audio is playing, but no actual audio plays. Very strange.