homeassistant

12292 readers

18 users here now

Home Assistant is open source home automation that puts local control and privacy first. Powered by a worldwide community of tinkerers and DIY enthusiasts. Perfect to run on a Raspberry Pi or a local server. Available for free at home-assistant.io

founded 2 years ago

MODERATORS

[email protected]

greatalbatross

Home Wiring (lemmy.ml)

submitted 4 months ago by [email protected] to c/homeassistant

18 comments fedilink hide all child comments

This might be tangential to HomeAssistant but Im currently thinking about a household renovation and one thing I am considering is wiring.

I have some POE devices along with many other that run with a 12v DC supply.

I'm lookin at putting in a relatively straightforward 12v battery UPS with a small solar panel to charge. I probably only have space for 1500W of panels so putting in a whole grid tied solution is overkill. Primarily this is to provide backup as we sometimes lose power.

Networking wise I think I will put RJ45 into each room as we are concrete reinforced construction and so signal quality is an issue.

My query was how feasible it is to run both standard PEO devices and 12v devices (1-2w) all over POE.

I thought the alternative would be to run separate 12v cables with USB connectors at the end into each room as well as Rj45

Is anyone else doing this in their home?

you are viewing a single comment's thread
view the rest of the comments

[–] [email protected] 3 points 4 months ago

Pull a bunch of fiber well you're running cables. Fiber is really cheap, it's expensive to terminate, but you can have the fiber pre-ran everywhere, and if you ever do need extra speed, or resistance against electrical interference, there you go you can borrow somebody's Terminator for a day