homeassistant

12211 readers

61 users here now

Home Assistant is open source home automation that puts local control and privacy first. Powered by a worldwide community of tinkerers and DIY enthusiasts. Perfect to run on a Raspberry Pi or a local server. Available for free at home-assistant.io

founded 2 years ago

MODERATORS

[email protected]

Simple video doorbell software recommendations? (self.homeassistant)

submitted 5 months ago* (last edited 5 months ago) by Heavybell to c/homeassistant

28 comments fedilink hide all child comments

So I'd like to have a video doorbell set up so that it communicates locally with my HA, raising an event when the button is pressed, allowing me to watch its audio and video stream live, and speak back to whoever is at the door. Ideally either from the browser or my phone, when I'm at home or not.

I don't care about motion sensing or AI or even NVR functions really. What software do I need? Should I bother going through the process of setting up Frigate or is there something simpler that would do the job?

you are viewing a single comment's thread
view the rest of the comments

[–] [email protected] 2 points 5 months ago* (last edited 5 months ago) (2 children)

Yep, but the method is separate from HA. Could do it two ways, I use Pi-hole so that it's still able to contact the NTP server (could also set the time server to something local through the desktop app, I believe) but block all other external traffic, or you can block external access through your router firewall. I noticed the time would occasionally be inaccurate if I had blocked all internet access.

Either way you can use a VPN or other tunnel service to access while you're away from home. I use WG-tunnel on my phone to auto connect to VPN when I disconnect from my home network, it's quite handy.

[–] keyez 2 points 5 months ago (2 children)

Awesome that's good to hear, all my LEDs and stuff I have blocked to everything but HA at my firewall but some devices like my smart vacuum apparently NEED internet access to work at all which I was hoping it didn't. My current doorbell needs it I think but hoping to get a new doorbell and camera when I move next year.

[–] [email protected] 2 points 5 months ago

Yep, Reolink cams can be fully local only and still work fine.

[–] [email protected] 1 points 5 months ago

One of my key buying points for hardware is "will this run without any internet, and could I set it all up again without internet?".

This is why I'm so happy to finally have Hue on my zigbee controller. And it's why I'm always on the lookout for a second hand Valetudo compatible robovac.

[–] [email protected] 2 points 5 months ago (1 children)

You could also set up a local NTP server, and block them entirely.
Currently, I have mine set with an invalid gateway, and blocked from the internet to be sure.

[–] [email protected] 1 points 5 months ago

I didn't ponder it when setting the cameras up, but after writing these posts I was planning to do just that when I'm back at home.