Linux

48372 readers

1902 users here now

From Wikipedia, the free encyclopedia

Linux is a family of open source Unix-like operating systems based on the Linux kernel, an operating system kernel first released on September 17, 1991 by Linus Torvalds. Linux is typically packaged in a Linux distribution (or distro for short).

Distributions include the Linux kernel and supporting system software and libraries, many of which are provided by the GNU Project. Many Linux distributions use the word "Linux" in their name, but the Free Software Foundation uses the name GNU/Linux to emphasize the importance of GNU software, causing some controversy.

Rules

Posts must be relevant to operating systems running the Linux kernel. GNU/Linux or otherwise.
No misinformation
No NSFW content
No hate speech, bigotry, etc

Related Communities

Community icon by Alpár-Etele Méder, licensed under CC BY 3.0

founded 5 years ago

MODERATORS

[email protected]

[solved - I was looking for mDNS] Is there a kde-connect like VPN? (self.linux)

submitted 4 months ago* (last edited 4 months ago) by TMP_NKcYUEoM7kXg4qYe to c/[email protected]

23 comments fedilink hide all child comments

My issue is that many of my remote desktop apps require knowing the IP adress of the other PC. I'm looking for a VPN that auto-discovers other devices on the same network. That way I could just "ssh" into the same IP every time, because it would be IP inside of a virtual network. Ideally I am looking a solution that does not require internet connection.

Thanks.

Edit: I should probably specify my usecase. I have a portable desktop and use VNC from a laptop to connect to it. To do that I need the IP of the desktop but that's different on a different network. This can be solved by using hostname.local as the "IP". (hostname is the "ubuntu" in "bob@ubuntu$:~/Documents") The solution is quite simple, I just haven't known about it.

you are viewing a single comment's thread
view the rest of the comments

[–] [email protected] 4 points 4 months ago* (last edited 4 months ago)

Bit confused about what you're looking for. If you're just SSH/VNC ing into devices on the same local network, then you can simply use their local IP address, which you can find with a command like ip addr and will rarely change, or their hostname if your network is configured properly. There are several GUIs that can remember connection info for you, so you likely will only need it once. It's also quite easy to scan the local network for SSH servers if you have nmap (nmap -p22 <your ip address range, e.g. 192.168.0.1/24>). If you need to connect to a device on your home network from a different network, any VPN software can achieve that. I'm not aware of any remote desktop solution that doesn't require a network connection, but your network doesn't necessarily need to be connected to the Internet.

Are you looking for a GUI that combines all those things?