bike wrench

837 readers

1 users here now

A place to ask bicycle repair questions, and for bike shop monkeys to share advanced non commercial wrenching resources (no YouTube self promotion). This is only for repair related topics.

[email protected]

founded 2 years ago

MODERATORS

j4k3

DIY true a wheel (self.bikewrench)

submitted 6 months ago* (last edited 6 months ago) by evasync to c/bikewrench

7 comments fedilink hide all child comments

I had some wheel made but when they rotate they come in contact with the disc break pads (slightly).

The bikeshop that built them will take another month to look at this, as they are fully booked, and I dont want to pay 35+ on another bikeshop..

Is it doable to DIY this with a spoke key and using the fork as a stand?

(I think it would be a useful skill to learn as it will make me less dependent on bikeshops)

you are viewing a single comment's thread
view the rest of the comments

[–] [email protected] 2 points 6 months ago* (last edited 6 months ago)

No, the disc is attached to the wheel hub. Wobble on the rim has no effect on the brakes. If it was a road bike with rim brakes then it would but not with disc brakes.

If you rotate the wheel and look thru the brake caliper you can see which part of the disc rubs and which side. Put adjustable wrench on that part and bend it to the opposite direction and check again. It's pretty easy to straighten. I've had that happen on relatively new discs as well.

Here's a good tutorial