homeassistant

11896 readers

54 users here now

Home Assistant is open source home automation that puts local control and privacy first. Powered by a worldwide community of tinkerers and DIY enthusiasts. Perfect to run on a Raspberry Pi or a local server. Available for free at home-assistant.io

founded 1 year ago

MODERATORS

[email protected]

Climate to turn on/off heat pump (self.homeassistant)

submitted 7 months ago by peregus to c/homeassistant

16 comments fedilink hide all child comments

I have created this climate:

- name: "Riscaldamento"
  unique_id: "termostato"
  modes:
    - "off"
    - "heat"
    - "cool"
  mode_command_topic: "home/riscaldamento_raffrescamento/TEST/mode/set"
  mode_state_topic: "home/riscaldamento_raffrescamento/TEST/mode/state"
  temperature_command_topic: "home/riscaldamento_raffrescamento/TEST/temp/set"
  current_temperature_topic: "home/riscaldamento_raffrescamento/TEST/temp/state"
  power_command_topic: "home/riscaldamento_raffrescamento/TEST/pump/set"
  payload_on: 1 
  payload_off: 0
  min_temp: 17
  max_temp: 28
  temp_step: 0.1
  precision: 0.1

thinking that the power_command_topic would be sent whenever the temperature would go over/under the one set, but nothing ever get send to that topic. How can I turn on the pump when the temperature goes under the one set and turn it off when it goes over?

you are viewing a single comment's thread
view the rest of the comments

[–] peregus 1 points 7 months ago (8 children)

Don't I need at least one to read the temperature from MQTT? Or can I just use an MQTT sensors? How?

[–] [email protected] 2 points 7 months ago (7 children)

here is my config yaml for climate. added hint for your case but i never had heat pump, does your heat pump only heat or does it also cool? exemple here is ok if only heat. If yours heat/cool, try some of the hacs thermostat addon. A quick search led me to this https://community.home-assistant.io/t/generic-thermostat-switch-between-heating-and-cooling/420053 which point to https://github.com/swingerman/ha-dual-smart-thermostat but i know they are more hacs addon for thermostat, you may need to search which is good for your use if the one above doesn't suit your needs

climate:
  - platform: generic_thermostat
    name: Thermostat Chambre (Riscaldamento)
    heater: switch.radiateur_chambre (device to toggle your heat pump)
    target_sensor: sensor.sonde_chambre_temperature (your temp sensor)
    min_temp: 12
    max_temp: 21
    ac_mode: false
    target_temp: 19
    cold_tolerance: 0
    hot_tolerance: 0.1
    min_cycle_duration:
      seconds: 300
    keep_alive:
      minutes: 3
    initial_hvac_mode: "off" (set this to heat if you want it to be active when HA start/reboot)
    away_temp: 12
    precision: 0.1

[–] peregus 1 points 4 months ago (3 children)

I completely missed your reply, sorry. My system cools and heats, and I really would like to avoid addons to avoid possible brakes in future updates. Do you think that it would be possible to do it with automation? (They can finally be divided into categories!)

[–] [email protected] 1 points 4 months ago (1 children)

Instead of using a community add-on, you can create two generic thermostat. https://www.home-assistant.io/integrations/generic_thermostat/

[–] peregus 1 points 3 months ago (1 children)

Mmm...ok. Do you think that there is a way to hide one of them based on the season?

[–] [email protected] 1 points 3 months ago

You can use an helper to toggle from one to another and use an automation to trigger it (or a simple switch on your dashboard).

But if I were you, I would use a community add-on as dual AC isn't a niche, I guess it will keep being updated in future. I've been using some community add-on for a couple of years and none have been dropped til now.

load more comments (1 replies)

load more comments (4 replies)