bike wrench

832 readers

2 users here now

A place to ask bicycle repair questions, and for bike shop monkeys to share advanced non commercial wrenching resources (no YouTube self promotion). This is only for repair related topics.

[email protected]

founded 2 years ago

MODERATORS

j4k3

Can i replace the 19mm nuts on my ebike's rear axle with 18mm nuts? (slrpnk.net)

submitted 7 months ago by [email protected] to c/bikewrench

6 comments fedilink hide all child comments

Context: my ebike has 19mm nuts on the rear axle (and 15mm on the front). I have an old Proto wrench that's a 15mm/18mm, so i'm wondering if i could replace the rear nuts with 18mm nuts instead, so i can carry around one less wrench.

The bike is an Eahora Cupid with a 1000w motor if that makes any difference.

you are viewing a single comment's thread
view the rest of the comments

[–] j4k3 5 points 7 months ago

Some locknuts have a different size hex flat than a standard size and can be sourced locally. There are not "custom" sizes for the most part, and if you find something like that, you should be extremely skeptical of what you find.

Generally, hardware should always fall inside an engineering standard size. This will be like an ISO, DIN, or JIS number. This standards number will specify all of the material properties and tolerances. While you may not be interested in these details, their existence helps to verify you're buying something relatively safe. Failure at the rear is not as bad as the front, but it can still make a really bad day.

Here is the wiki. The table should help you find combos that exist: https://en.m.wikipedia.org/wiki/Nut_(hardware)