GameBoy

Why have one oled when you can have two? The regulator shows the current power voltage and ma usage.

This is an open source project that adds a GBC processor and screen into a DMG shell. Have to say, I really enjoy the weight. The github can be found here.

They tried to claim that they weren't ending the game boy line.......welp. Still waiting on that Game Boy Advance sucsessor any day now....

We all know the DS was the next Game Boy. WHY DIDN'T THEY JUST CALL IT THAT??? The original ones even played GBA, GBC, and GB games for fucks sake!

The DS WAS a Game Boy. That's it. That's the end of the story.

The 369 in 1 can be reflashed with the Nightrap rom. Funny thing too, the bootleg shell feels higher quality.

My A button was requiring a harder press for the input to be registered than normal, so I opened up my GBC and noticed this transfer on the PCB. I guess years as a child hard holding A to improve pokemon catch rates had caught up. What's the best way to remove this? Isopropyl alcohol and cotton bud?

Limited Run Games did preorders last April fools 2023. No actual gameplay, just the movies in quality similar to the GBA video carts.

Rom is 256mb. It doesn't load in the Mister, OpenFPGA, or mGBA.

Won this manual at a Good Will charity auction. Just wanted to share it here in hopes that it would make some of you smile as big as I did!

This game was so much fun in highschool. I never purchased the Lost Age way back then, but I saved my password for decades with the intent to pick it up eventually. I was pretty ecstatic about the games being released on Switch Virtual Console, but playing The Lost Age on the Switch... It just isn't the same.

So I just started playing it on a modded 2DS. I have decided this is the console I'm going to finish the series with. Definitely better dpad (and joystick), comfortable to hold, and maybe the smaller screen helps it appear more like the original games.

Bought this little kit for a few dollars on aliexpress awhile ago figuring it was an interesting project. I would not recommend it and I've already revered back to stock.

1. It makes the cartridge bulge.
2. The long term reliability is questionable (my chip seemed like a rebadge).
3. It will not work correctly on the analogue pocket (and possibly the FunnyPlaying FPGA GBC).

Also I wouldn't use clips like this for the battery when you can use the HDR retainer. This was done years ago and I don't have any more of those on hand to replace it.

DS Lite? Yes. DSi XL? For sure. 2DS XL, 3DS and its New and XL variants? You bet. But not a single 2DS aftermarket shell. Single backplates are sold here and there but not the whole assembly.

What gives? Is the 2DS really that niche compared to its siblings?

Fun project to convert a Japanese cartridge to a Flashcart I assembled a while back. https://github.com/JRodrigoTech/FLASH-ROM-Adapter-for-GameBoy

If you haven’t given this romhack a shot, it’s worth a go. It tries to recreate the original 1997 demo of Pokemon Gold/Silver from Nintendo SpaceWorld.

Link to STL file here

The ReBoi kit promises to replace the Game Boy’s guts and display with no soldering required, but you’ll need to source the Game Boy and Raspberry Pi yourself.

Create a bootable, working Pokémon game by recording it crash multiple times.

Not the actual use case for this extender, but I think it's fun that it works on real hardware.

Pokemon Pinball Generations (romhack by RainbowDevs)

Custom 3D printed cartridge case

Custom holo-foil label

Never having had a GBA growing up (or really any gaming system), I recently decided to delve into the retro scene and try to reshell a GBA SP. I bought a board and shell off Aliexpress and a few reproduction cartridges. (VERY) stupidly wanted to test the repo cart without finishing the shell and ripped off the cartridge slot!!!!

After much profanity and months before I could stomach looking at the thing, I buckled down and spent too much buying tools/supplies. Many many many many many Youtube videos later, I finally managed to reseat the slot and connect the damaged pads.

Just thought I'd share that it's possible, having started only with very rudimentary soldering skills.

I have issues mit my GB USB Smartcard 64M. I am using ems-qart software under linux. The software doesnt find the card (screenshot attached)

This is the message in the terminal:

Failed to open device, libusb error: LIBUSB_ERROR_IO Failed to open device, libusb error: LIBUSB_ERROR_NO_DEVICE Could not find device, is it plugged in?

As I can see with lsusb, it is acutally there:

Bus 001 Device 009: ID 4670:9394 EMS Production Game Cube USB Memory Adaptor 64M

Starting ems-qart as root doesnt solve the issue. I checked the cable, and used three different ones... but always the same behaviour.

Any Ideas?