Supermini NRF52840
From left to right on the top:
Kontro with custom Yuzu keycaps
Haitun with CK Cyrillic beige
Curio with DCS Input, both by MechVault
TPS40 with GMK Oblivion
S46 with KAT BoW
from left to right on the bottom:
Shizuku with Gmk Modo light,
Tsuru with Kuro Shiro,
Tsuru with DMK something,
Wolfjaw with doys,
Wolfjaw with GMK Apollo,
Infernum with reclaimed caps,
Corne with custom DSA katakana
The two fella's on top are grumpy's by Weteor, using some AliE caps
Madeline 30% from Ruby Builds
DSS All Hallows Eve, one of, if not the most, rare DSS Keycap sets
LITCHCX Raw Silent Linear switches
Stainless Plate with foam
22
Custom Split keyboard Lily58 Pro MT3 Dev/tty keycaps handwired rotary encoder and underglow
(lemmy.world)
handwired the rotary encoder and rgb underglow strip
https://kriscables.com/handwire-rotary-encoder-split-keyboard/
with gaps and without gaps + 5 acrylic color options, can be found here:
27
Corne v3, Sofle v2, Corne wireless ZMK, Cygnus wireless 2.4ghz. Collection by u/lurkzone
(lemmy.world)
collection by u/lurkzone:
Corne v3 wired with rgb - first foray into splits (DSA)
Sofle v2 wired - I thought I needed more keys (Susuwatari MT3)
Corne wireless ZMK - wire free! (XDA)
Cygnus wireless 2.4ghz - keywell wireless goodness with the quick remap of Vial (bleached MT3)
Hi, that's a tenting case that does come with stainless steel M5 bolts and nuts that you can adjust to your height preference. I do sell them here: https://kriscables.com/product/lily58-pro-acrylic-tenting-case-kit/
I have cut the acrylic to exact size of 1000mAh battery. Probably i would recommend to position the battery where i have cut my logo in the middle of the base for 2 reasons:
- under the controller there are sharp pins, which would be safer to avoid having the battery under them, just to be safer
- if you would like to use the tented case as a normal case you could place a rubber feet where the battery is
Just my personal notes and suggestion, but this way it works for me
It is strange, but intriguing !
For now not liking the stiction of the ball, which should go away (i hope) with usage. Also the scroll wheel feels flimsy and it is inconsistent.
For now still adapting to it, but not sure if i'll keep it because of the mentioned.
you can get a Lily58 Tented case kit here: https://kriscables.com/product/lily58-pro-acrylic-tenting-case-kit/
Shipped from Portugal to any place in the world with a working postal service
It would and i actually changed those caps after the stream: https://www.instagram.com/stories/kriscables/3311976359813784815/
Anything you would like:
-
Volume
-
Brightness
-
Zoom in/out
-
Scroll up/down
-
Scroll left/right
-
Color picking and other stuff while designing Etc. The possibilities are endless. You can even add key+encoder combinations.
I don't have any experience with those, but i'm looking lately to upgrade my G305. I have been using lately my wired G502 and while g305 is a good mouse i have been felling much much comfy with the G502, even though it is wired.
Oled Screens ? Show whatever info you set in the firmware
While it may look alike, they are not similar with piantor at all
view more: next ›
my take is because it brings joy + may be some level of challenge, while making a build plus extra fun to type on something new, adapting a keymap to your needs etc after that