iwasgodonce

joined 1 year ago
[–] iwasgodonce 3 points 1 month ago

I've had good luck with goharddrive.com. They sell through amazon as well, but I believe they ship direct. I usually get the hgst, or now wd, ultrastar hard drives. I've had zero issues.

[–] iwasgodonce 55 points 6 months ago (5 children)

In utah, I can average 80 mph on a road trip, in the houston texas area I can go maybe 20 mph average, so time is a lot more useful of a measure.

[–] iwasgodonce 1 points 9 months ago

My parents' isp setup a static dhcp entry per customer. If you change the mac address of your router you don't get an address. The address you get with the proper mac address is constant and can't be changed.

[–] iwasgodonce 1 points 10 months ago

Also trains the next generation to think these kinds of privacy violations are ok, when they are not.

[–] iwasgodonce 3 points 10 months ago

better than micro usb at least

[–] iwasgodonce 2 points 10 months ago* (last edited 10 months ago) (1 children)

I really like my sofirn sc31t. Got it for $17 on AliExpress. 2000 peak lumens but it has several settings if you want it dimmer. usbc rechargeable with an 18650 battery. Has a tailcap switch. Might be slightly larger than you are wanting.

sofirn sc18 I have is also good at 1800 peak lumens for about $10, with several brightness settings, but it's more likely to turn itself on in drawers if you don't use the lock feature (quadruple click the button). Also usbc rechargeable with an 18650 battery. No tailcap switch. Pretty small, might be what you're wanting.

Looking at their website, the sc32 looks like it might be what you want.

[–] iwasgodonce 2 points 10 months ago (2 children)

Why would it require a license?

[–] iwasgodonce 17 points 10 months ago

The jalapeno ones have way better flavor.

[–] iwasgodonce 16 points 11 months ago* (last edited 11 months ago) (2 children)
  • DS-lite
  • switch
  • n(at)64

what networking term will they use for the next one? ndp?

[–] iwasgodonce 16 points 11 months ago* (last edited 11 months ago) (1 children)

https://loopsofzen.uk

If it doesn't work, you don't have working ipv6.

[–] iwasgodonce 18 points 11 months ago (2 children)

Hurry and buy a new graphics card before the prices go crazy again.

17
submitted 1 year ago by iwasgodonce to c/ipv6
 

Their new modem/router doesn't support opening ports in the ipv6 firewall, so if you want to open ports, they recommend disabling ipv6 entirely. For ipv4, they no longer support forwarding ports from only specific source addresses either, which is way less secure. You can only forward ports from all source addresses. You also have to use their crappy app to add port forward rules, it's no longer available in the web ui. You can completely disable the ipv6 firewall in the web ui, but that wouldn't be safe.

Old motorola modem/routers could do all of the above.

It says it can do bridge mode at least, but it seems silly to need 2 devices just to open ipv6 ports.

How are routers being made now in 2023 that don't have proper ipv6 support? It seems crazy to me.

15
submitted 1 year ago by iwasgodonce to c/ipv6
 

I'm on att for my home internet and unless you go to the effort to bypass their router (it does 802.1x authentication so it's a bit of a pain to do so), they only give you /64s via dhcpv6 prefix delegation, nothing bigger. You can request up to 8 of them though.

It looks like mikrotik can't request multiple prefixes in a single request, based on their documentation.

Edge routers look like they can if configured from the cli.

I've been using a linux box with dhcpcd and that works. Would be nicer if systemd-networkd supported multiple prefixes directly so I didn't have to try to get dhcpcd and systemd-networkd to try to play nice with each other since I use systemd-networkd for the lan side interfaces, wireguard, etc.

What other routers and dhcpv6 clients support requesting multiple prefixes in a single request? I'm looking to see if there's a better option out there than what I'm doing now.

view more: next ›