It’s a pretty easy swap, especially when you aren’t worried about voltage sag.
Convoy S21A with P2500 buck driver and KD full spectrum pink 10W 5050 emitter.
Fun little light, but a little off in that the Vf of the emitter is 4V on high but it didn’t play well with the convoy buck/boost driver…. So I went with a buck. Use 2x 18350 to get well regulated performance or 1x 21700 for convenience and runtime but experience voltage sag.
Either way it’s a fun light that throws well for an S21A.
😂😂
Maybe if I can work up a decent spacer!
Ooh this driver creates some interesting possibilities…!
That’s actually kind of a nice blue
Is the ZWB3 glass.
The second is a zoom showing the minor secondary emission spectra, so there’s light around 400 and 675. It also shows the filter attenuates the 400+ light but doesn’t help with the <400 light so much.
Convoy 3x21b too
A super user took an emission spectra of one of the LEDs I use. Interesting data for sure!
Ooh yeah that’s a goner. I wonder what happened. Usually it takes a lot of extended heat to do that and that would be hard to do given the way hank sets up his lights.
It could be anything from a driver fault to a short. Just replacing the led won’t be sufficient.
I’m thinking those green indicator LEDs need to be purple…
Weird color? Check
Overkill? Check
Borderline useless? Check
Low skill? Check
Right up my alley.
I swapped out the stock emitters in an SP36 for 4 3535 sized pink emitters from KD. The output of the SP36 is pretty well matched to the pink emitters, except turbo won’t be available at a battery voltage of 3.6ish.
Not perfect but still fun. 👍
First Lemmy post. Let’s see how this goes..!
I got some 5050 and 3535 pink emitters from KD
They’re looking like they will be fun to work with..!
Social media platforms are weird.