Reddit_refugee7834

joined 11 months ago
sorted by: new top controversial old
A guide to a longer lasting Smartphone. in c/technology
[–] [email protected] 3 points 11 months ago

The Pixel 3 I have I got used and it still works, although the back glass is broken and the battery health is 85%, and stopped getting updates around a year ago. I'd say it's 5 years run so far (released October 2018) is pretty good. If you know of any other devices that would be useful for 4~7 years please share! I think high end Apple and Samsung devices would, and they are now committing to longer software support, and are likely to carry though.

A guide to a longer lasting Smartphone. in c/technology
[–] [email protected] 2 points 11 months ago* (last edited 11 months ago) (1 children)

Hello, here is a comparison of the 5G support specs. on the on T-mobile of two of the latest Fairphone's vs Googles latest Pixel. Note that as of writing the Fairhone 5 is not available in the USA

The Fairphone 4 https://murena.com/america/shop/smartphones/brand-new/murena-fairphone-4/#tech-spec

5G supported bands n1/n3/n5/n7/n8/n20/n28/n38/n41/n71/n77/n78

The Fairphone 5 https://murena.com/shop/smartphones/brand-new/murena-fairphone-5/#tech-spec

5G supported bands n1/n2/n3/n5/n7/n8/n20/n28/n38/n41/n48/n66/n71/n77/n78

The Google Pixel 8 https://store.google.com/us/product/pixel_8_specs?hl=en-US

5G Sub-621: Bands n1/2/3/5/7/8/12/20/25/26/28/29/30/38/40/41/48/66/70/71/77/78
5G mmWave21: Bands n258/260/261

T-mobiles 5G bands https://www.t-mobile.com/support/coverage/t-mobile-network

5GUC (Ultra Capacity 5G)
Band n41 (2.5 GHz) // Supported on all the above 
Band n258 (24 GHz) // Only supported by the pixel 8
Band n260 (39 GHz)//  Only supported by the pixel 8
Band n261 (28 GHz) // Only supported by the pixel 8
5G (Extended Range 5G)
Band n71 (600 MHz) // Supported on all the above

Hopefully this is helpful. Next would be the 4G LTE comparison.
P.S. I understanding what 5g frequencies are used in what cases in important to extracting meaning from this.

A guide to a longer lasting Smartphone. in c/technology
[–] [email protected] 2 points 11 months ago

Thanks for checking my sources! I think you made fair points, and the sample size in the one test that seemed reference-able was too small, so I'll edit my post to suggest using a glass screen protector.

A guide to a longer lasting Smartphone. in c/technology
A guide to a longer lasting Smartphone. in c/technology
[–] [email protected] 2 points 11 months ago* (last edited 11 months ago) (3 children)

Thanks for the input, you have a lot of helpful points! I encourage others to do there own research as I have done. In my research I find that liquid “screen protectors” increase the force required to crack the screen, and have add no functional scratch resistance, hence why I recommend the screen protector on top, glass is the way to go, as it will crack hopefully absorbing the force of impact and you can replace it instead on you display :)

Here's what I found in my research about screen protectors

https://www.youtube.com/watch?v=NIPOTDUnUfo
https://www.youtube.com/watch?v=dhUrevQKFbo
https://www.youtube.com/watch?v=Knv5_zc8ghA
https://www.youtube.com/watch?v=S00WsL6cnvw

A guide to a longer lasting Smartphone. in c/technology
[–] [email protected] 12 points 11 months ago* (last edited 11 months ago)

Thank's for the advice, and being the first replay to my first post! I've retired from Reddit and hope to add value to society without supporting as many companies I disagree with. :)

157
A guide to a longer lasting Smartphone. (lemmy.today)
submitted 11 months ago* (last edited 11 months ago) by [email protected] to c/technology
33 comments fedilink
 

This is a guide to a longer lasting Android device, from choosing one to how to preserve the life of the one that you have.

Choosing a long-lasting and repair friendly phone:

To get the best shot at longevity, start with a high quality device from a manufacture with a history of long term device support, and one that regularly releases there modifications to the kernel source code. A device that has an unlockable bootloader (XDA developers Forums is a good place to see about ROM support), and is user repairable (See iFixit's Smartphone Repairability Scores) will allow you to keep the software & hardware going the longest. Both the Google Pixels, and Fairphone's line are a good place to start. Fairphone is the USA is sold though Murena

Before you use your phone

  • Get a good sturdy case like an Otterbox
  • Apply a screen protector. I recommend Glass, Sapphire is the best (but very expensive).

Battery

Lithium-ion (LI-on) battery's wear out faster when near the upper and lower charge levels (read why here: Battery University), so avoid charging or discarding the battery fully, aiming for around 20~80% is a good target.
Never leave your phone in a hot car or in the Sun, extreme heat exposure reduces the lifespan of the battery & is generally bad for other components.

Charging

  • Avoid fast & wireless charging by using a older charging block that only outputs a few(1~2) Amps. (to reduce the heat the battery endures)
  • Use a magnetic charging cable to reduce the wear on the plug (Like Volta), you need a bulky case to have it flush to not make the phone uncomfortable to hold though. 
  • When/If you use a regular charging cable don't move the phone around when it's plugged in, movement wears the plug much sooner.
Use a charge limiting feature. (Listed in order of recommendation.)

  1. If your phone has a built smart battery charge management feature, use that. (Most modern high end phones do, including Samsung's, Google's & Apple's)

  2. If you have Root; use ACCA(a GUI for ACC) (Suggested Charging config: Level limit: 85%, Current: 700mA, Voltage: 3800mV)

  3. Buy a switch that can wirelessly cut off power based on charge level:

  • A Chargie by Lighty Electronics is a Bluetooth enabled USB-A power switch, the accompanying APP configures it to auto cut off power based on power draw or charge level. Note that in the newest Android versions/PlayStore restrictions prevent versions of the APP past v2.2.20 from auto enabling Bluetooth, making this solution a little less appealing as you have to leave Bluetooth on you manually enable it.
  • Using an Automation APP like Tasker to turn off a Home Assistant-controlled smart plug when the battery exceeds a reprogramed threshold, is a more reliable method & works for any device.
  1. Install an APP that alerts you at charge levels so you can unplug you phone. (AccuBattery, Battery Guru: Monitor & Health, etc.

Waking & Locking the screen

To reduce the use of the power button, as it's a fail point, although less common.

To wake 

 1. Use the features "Lift to check phone/events" and "Double-Tap to check phone"

 2. Use the fingerprint reader to wake and unlock.   

To lock/turn off the screen  

 1. Use a launcher that support double tapping the home screen to lock it (Nova launcher, Smart launcher, etc.)

 2. Use Googles Quick Tap feature if you have a Pixel or the APP Tap, Tap for any Android to lock the screen. (Note: battery life might suffer)  

 3. Use a short Screen Time out.

TIPS
  • Get a new case to get a fresh look and feel when your tired of the one you have.
  • Read through the comments! There are many good additions from people with different experiences & perspectives.

Edit's: Updated & reformatted several things based on comments <3