Megaf

joined 2 years ago
MODERATOR OF
25
submitted 2 months ago* (last edited 2 months ago) by [email protected] to c/spiders
 

Hi everyone, first post here,

I'm in Dublin, Ireland. I rescued one of them from a box that was about the get shredded and the other from the laundry before my wife killed her.

I then added them to my terrarium.

The one from the box was in a bad shape, with a broken leg, which has since detached and it was very lethargic, it is now a happy and fat spider after eating a couple of flies.

The other went through a molt already!

They are small ish, around 4 cm legspan? And the abdomen pattern is one of the most gorgeous I've seen! Golden spots.

Can you help me ID them? Also, are they female? Or are they the male of a the giant house spider?

More photos in my Gram Social

 

Hi everyone!

I have an audio-technica AT-LP60XUSB, it had been great for me, it played Atom Heart Mother, Random Access Memories, Animals, Joshua Tree, all wihtout issues.

Until a few days ago when I got Daft Punk's Homework!

In a few track, it skips, it simply can't play it.

I read elsewhere about people who replaced the current conical stylus with an ogival stylus, and that fixed the skipping issues.

Now I ask, which ogival styluses would be compible? Any recommendations?

Thanks!

 

Hi everyone!

I have an audio-technica AT-LP60XUSB, it had been great for me, it played Atom Heart Mother, Random Access Memories, Animals, Joshua Tree, all wihtout issues.

Until a few days ago when I got Daft Punk's Homework!

In a few track, it skips, it simply can't play it.

I read elsewhere about people who replaced the current conical stylus with an ogival stylus, and that fixed the skipping issues.

Now I ask, which ogival styluses would be compible? Any recommendations?

Thanks!

[–] [email protected] 1 points 1 year ago

Yes, it does work well. Using it now, though, I had to manually create a menu entry/launcher for it.

 

Hi all, Android 12, on an Ulefone. Android seems to continue to kill Syncthing for some reason, I've set Battery Unrestricted for it already and unrestricted data access too.

3
submitted 1 year ago* (last edited 1 year ago) by [email protected] to c/[email protected]
 

Hi everyone. I just noticed something odd. I believe, if I'm not mistaken, that I used to have Bitwarden's Vault as a Progressive Web App installed here on my system in the past, which I have since remove.

Today, though, I decided to reinstall it. So I opened up Bitwarden's website and sure enough, for my convenience, there was an “Install” icon on the address bar.

However! That seemed to have installed the Main Page, and not the vault page itself.

If I click “Login”, it will only open a new web browser tap to a login page, despite the fact that I'm already logged in.

Then I thought, fair enough, the “Install” icon was on the main page, the problem is, the Vault page's, doesn't seem to be available as a PWA, at all, as it doesn't have the option to be installed.

Was it all just a dream and I never had a Bitwarden Vault PWA, or something did change?

[–] [email protected] 1 points 1 year ago

Nope :( Neither dnsmasq nor bind are installed. Nothing on port 53 either.

[–] [email protected] 1 points 1 year ago

I don't have systemd-resolved installed.

[ 0 ] root@blaster:~#: apt remove --purge --auto-remove systemd-resolved
Reading package lists...
Building dependency tree...
Reading state information...
Package 'systemd-resolved' is not installed, so not removed
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
[ 0 ] root@blaster:~#: ps aux | grep systemd
root         496  0.0  0.3 103956 56616 ?        Ss   10:17   0:05 /lib/systemd/systemd-journald
root         520  0.0  0.0  27656  7352 ?        Ss   10:17   0:00 /lib/systemd/systemd-udevd
systemd+     807  0.0  0.0  90528  7188 ?        Ssl  10:17   0:00 /lib/systemd/systemd-timesyncd
message+     813  0.0  0.0  11956  6724 ?        Ss   10:17   0:05 /usr/bin/dbus-daemon --system --address=systemd: --nofork --nopidfile --systemd-activation --syslog-only
root         835  0.0  0.0  50060  8000 ?        Ss   10:17   0:00 /lib/systemd/systemd-logind
reglnx      6027  0.0  0.0  19868 11644 ?        Ss   10:19   0:01 /lib/systemd/systemd --user
reglnx      6107  0.0  0.0  11148  6744 ?        Ss   10:19   0:01 /usr/bin/dbus-daemon --session --address=systemd: --nofork --nopidfile --systemd-activation --syslog-only
reglnx      6514  0.0  0.1 594632 17812 ?        Ssl  10:19   0:00 /usr/libexec/gnome-session-binary --systemd-service --session=gnome
root      639055  0.0  0.0   6332  2028 pts/1    S+   14:19   0:00 grep --color=auto systemd
[ 0 ] root@blaster:~#: 

[–] [email protected] 2 points 1 year ago* (last edited 1 year ago)

I just found this file, now sure if it's related or not.

$: cat /run/NetworkManager/resolv.conf
# Generated by NetworkManager
nameserver ::1

and

$: cat /run/NetworkManager/no-stub-resolv.conf
# Generated by NetworkManager
nameserver ::1

Edit: those are generated from the /etc/resolv.conf NM generates.

[–] [email protected] 2 points 1 year ago (2 children)

Thought about that too, but I don't have resolvd nor systemd-resolv or systemd-resolve active. Nor do I have avahi running. Interesting isn't it?

[–] [email protected] 2 points 1 year ago

I actually thought about that too, but it isn't.

#: file /etc/resolv.conf
/etc/resolv.conf: ASCII text
 

Hi everyone, so I'm having this weird issue. No matter the DNS and IP settings I use in NetworkManager, it will always generate the same resolv.conf.

resolv.conf

# Generated by NetworkManager
nameserver ::1

IPv6 is disabled by the way.

[–] [email protected] 2 points 1 year ago

OpenSolaris was insanely wonderful. I still have a collection of original, from Sun Microsystems, DVDs and CDs for Solaris, OpenSolaris and Solaris Express.

https://flic.kr/p/6DcdZk

[–] [email protected] 1 points 1 year ago

That's actually a quite ingesting concept, it is time we have native LBRY clients.

Here is the source code for it, https://codeberg.org/MorsMortium/LBRY-GTK

[–] [email protected] 2 points 1 year ago

I beg to differ, my fellow rebel.

Odysee is an open platform, perhaps, Odysee the website itself is not that open, but the protocol and network itself is!

I have actually been thinking, for a long while, about writing a new LBRY client myself that would implement the freedom of the original LBRY client with the nice features of the Odysee client.

[–] [email protected] 2 points 1 year ago

It's working just fine here. Latest Jerboa from F-Droid, just updated, on latest Android.

[–] [email protected] 6 points 1 year ago (1 children)

There's actually a lot of people there.

[–] [email protected] 11 points 1 year ago

Whelp, no one around closer than 300 KM from me. RIP.

 

This was in June 2009 or before even, Haiku didn't have an installer back then, just a disk image for VMs.

In June 2009, I uploaded some photos of it to my Flickr account on the Eee PC album and even wrote a tutorial on my blog on how to install it.

11
submitted 1 year ago* (last edited 1 year ago) by [email protected] to c/[email protected]
 

cross-posted from: https://lemmy.ml/post/1320741

Action Retro briefly shows an amazing ThinkPad T61 and run Haiku OS on it!

2
submitted 1 year ago* (last edited 1 year ago) by [email protected] to c/[email protected]
 

Action Retro briefly shows an amazing ThinkPad T61 and run Haiku OS on it!

 
 

cross-posted from: https://lemmy.dbzer0.com/post/2212

Quick post to answer some basic usage questions that can throw off new users.

Where should I register?

The age old question of fediverse. The answer is pick an instance that is not right-wing and you should be fine.

https://join-lemmy.org/instances makes this very easy. Once you find an instance, just go to its /signup endpoint. For the instance you're reading right now, it would be: https://lemmy.dbzer0.com/signup

Do I need to create a profile for each instance?

No! Each instance can access each other instance, unless it's been defederated because its admins are toxic (this is why I told you not to join right-wing instances earlier).

I joined an instance, but the community I am interested in is in a different instance

No problem. Simply add the instance domain at the end of the url endpoint.

For example, say you're in lemmy.ml and you realized that stable_diffusion is in lemmy.dbzer0.com. To access it, simply add @lemmy.dbzer0.com at the end of the url after the community name. So:

https://lemmy.ml/c/[email protected]

Or to put it differently, you can access any community, in any instance by adding /c/ (The requivalet of reddit /r/) and then [email protected]

If this doesn't work, then it's likely this instance is not yet federated with yours. To solve this, you need to search for it. See the next section.

But how do I even find the community I want to if it exists in any of hundreds of instances?

Use the search, it's really good to find the community you're looking for.

Note that if you search for an community in an lemmy instance your own instance doesn't yet know about, it won't find it. You need to give it more precice instructions to find it, which require the whole "address". To follow our example above, you would put [[email protected]](/c/[email protected]) in your search field.

When searching for a community in a new instance, it might take a few minutes to take effect. The first search will not return anything, but if you search again after a couple of minutes, it should appear.

Community? Instance?

An instance is a lemmy server hosted by someone. it has its own set of users and communities. lemmy.dbzer0.com is an instance. You can access (almost) every instance from any other instance.

a community is like a subreddit in reddit, or a channel in discord. It's a topic in inside an instance. stable_diffusion is a community inside the instance lemmy.dbzer0.com.

In more plain terms, consider a lemmy instance like a street, and a community like a number on that street. When you write [[email protected]](/c/[email protected]) you are giving the exact address and number to search for.

I keep seeing the same posts

In you're in a smaller instance and you've subscribed to communities in other places, you might have set up your default visibility to not show them.

Switch your view to Subscribed/Hot to get a similar view like the reddit frontpage.

Switch to All/Hot to get a similar view to reddit /r/all

You can store this setting permanently as default in your user settings

Pro-Tips

Also see

 

cross-posted from: https://lemmy.fmhy.ml/post/24569

I know people are confused about how fediverse works and how to use it. This is an attempt to compile a list of beginner's guides made by some amazing people on this topic.

I will update this list if any new guide is made so you can save this post for later. Also, if anyone has any good guide to add post it in the comments and I'll add it here.

view more: next ›