It sounds like your partition table is corrupted. Recreating it (with parted or fdisk) shouldn't affect the data. Also, I believe that if it shows up as a block device, you should be able to copy it with dd. dd can write to another block device or to a file (like an iso).
this post was submitted on 02 Jul 2023
3 points (71.4% liked)
Linux
48372 readers
1411 users here now
From Wikipedia, the free encyclopedia
Linux is a family of open source Unix-like operating systems based on the Linux kernel, an operating system kernel first released on September 17, 1991 by Linus Torvalds. Linux is typically packaged in a Linux distribution (or distro for short).
Distributions include the Linux kernel and supporting system software and libraries, many of which are provided by the GNU Project. Many Linux distributions use the word "Linux" in their name, but the Free Software Foundation uses the name GNU/Linux to emphasize the importance of GNU software, causing some controversy.
Rules
- Posts must be relevant to operating systems running the Linux kernel. GNU/Linux or otherwise.
- No misinformation
- No NSFW content
- No hate speech, bigotry, etc
Related Communities
Community icon by Alpár-Etele Méder, licensed under CC BY 3.0
founded 5 years ago
MODERATORS
After further investigation, I decided to mark the hard drive as corrupt. Fedora 38, Debian 12, and Windows 7 will not detect the drive, so I will send it to a data recovery institution to get my data. I honestly do not know what happened.
Drives do just go bad sometimes, even if you have done nothing bad to it. Might be that the partition table was corrupted, could be something more severe. A data recovery institution is the best option if you care about the data on it. Anything you do to try and recover it will possibly make it harder for a professional to successfully recover as much data from it.
And this is why backups are important, HDD, SSDs, or tape all have a lifetime on them - even if you never damage them externally. They will all fail eventually and take out data they contain when they do. Best to have multiple copies of data you care about - recommended at least 3, with 2 on different media (in case there is a defect with one format) and ideally with one being remote (to protect against fire damage or theft or other local event).
Not sure if you already sent the drive away but I would recommend checking the output of 'dmesg' (as root on most distributions) after you plug in the drive. It might give a clue as to whats wrong.
It could just be the enclosure or power supply of the enclosure. Can you hear/feel the harddisk starting up? You could try opening the enclosure and just directly install it into a PC if you feel comfortable working with hardware.