this post was submitted on 18 Oct 2023
15 points (100.0% liked)

Libre Hardware

102 readers
31 users here now

founded 4 years ago
MODERATORS
 

I am referring to both the design, and the independent, and auditable manufacture of the CPU. It should be noted that such a CPU needn't fully compete with modern ARM, Intel, AMD, etc. CPUs, but it would be an incredible boon to have a fully trustworthy piece of hardware, even if it is considerably lower in it's strength. For specifics, let's say a CPU that could run a lightweight Linux distro at a "tolerable" speed.

Creating the designs for the CPU, of course while still difficult, is, most likely, the most feesbile aspect -- I presume it would "just" consist of writing the Verilog, or some other hardware description language to describe the CPU's function. The manufacture, however, is a substantial obstacle. Modern photolithography is, quite litterally, at the very forefront of human technological creation. I am just hoping that turning back the clock perhaps 20 years on the technological complexity might reduce the barrier to entry.

all 6 comments
sorted by: hot top controversial new old
[–] 3arn0wl 9 points 1 year ago

There are RISC-V cores, whose designs have been published, which are capable of running a lightweight Linux distro, and even SBCs with them on. T-Head's C906 on the Nezha board is an example.

[–] [email protected] 4 points 11 months ago

I just stumbled over this project:

https://libre-soc.org/