ErgoMechKeyboards

5829 readers

15 users here now

Ergonomic, split and other weird keyboards

Rules

Keep it ergo

Posts must be of/about keyboards that have a clear delineation between the left and right halves of the keyboard, column stagger, or both. This includes one-handed (one half doesn't exist, what clearer delineation is that!?)

i.e. no regular non-split¹ row-stagger and no non-split¹ ortholinear²

¹ split meaning a separation of the halves, whether fixed in place or entirely separate, both are fine.
² ortholinear meaning keys layed out in a grid

No Spam

No excessive posting/"shilling" for commercial purposes. Vendors are permitted to promote their products/services but keep it to a minimum and use the [vendor] flair. Posts that appear to be marketing without being transparent about it will be removed.

No Buy/Sell/Trade

This subreddit is not a marketplace, please post on r/mechmarket or other relevant marketplace.

Some useful links

EMK wiki
Split keyboard compare tool
Compare keycap profiles Looking for another set of keycaps - check this site to compare the different keycap profiles https://www.keycaps.info/
Keymap database A database with all kinds of keymap layouts - some of them fits ergo keyboards - get inspired https://keymapdb.com/

founded 1 year ago

MODERATORS

Using Ferris Sweep + nice!nano with only one battery (self.ergomechkeyboards)

submitted 1 year ago by nan_1337 to c/ergomechkeyboards

9 comments fedilink hide all child comments

I made a mistake while ordering the parts for the Ferris Sweep: I only ordered one 301230 battery. I ordered the other one, but the >1 month delivery time is a bit long. I am wondering if it is possible to solder and build the keyboard now, while only installing battery in one of the sides, and use the only side only with USB-C. If yes, I have two more questions:

Which side should I install the battery in? From my understanding, one of the sides usually works as a "hub" for the other side
Is it easy to add the battery to a already assembled keyboard in the future?
Are there any good tutorials for assembling the wireless variant of the Ferris Sweep? I have mostly been able to find resources for the wired versions.

you are viewing a single comment's thread
view the rest of the comments

[–] nan_1337 1 points 1 year ago (2 children)

Thank you! It seems I might be able to just start the build process. Is it easy to install the battery later? I would assume I might need to remove the nice!nano and reinstall it? Would I then need to desolder?

[–] [email protected] 2 points 1 year ago (1 children)

@nan_1337 @Gumshoe do yourself a favor and socket the mcu. You’re going to hate nothing as much as desoldering an MCU again

[–] nan_1337 2 points 1 year ago (1 children)

I am super sorry for being such a noob, but can these be used to socket the board? And if yes: Do I solder the ones with pins only on one side to the pcb and the other ones to stick into the holes and solder to the nice!nano?

[–] [email protected] 2 points 1 year ago

@nan_1337 if they fit each other (and the PCB) the „standard“ would be to solder the sockets to the PCB and the headers to the MCU. And no worries, everyone sarted somewhere 😉

[–] Gumshoe 1 points 1 year ago* (last edited 1 year ago)

I installed my battery after installing my nice!nano, so no, you wouldn't need to desolder your controller to install the battery, even if you directly solder your controller instead of using sockets.