Do It Yourself

1911 readers

1 users here now

Make it, Fix it, Renovate it, Rehabilitate it - as long as you’ve done some part of it yourself, share!

Especially for gardening related or specific do-it-yourself projects, see also the Nature and Gardening community. For more creative-minded projects, see also the Creative community.

This community's icon was made by Aaron Schneider, under the CC-BY-NC-SA 4.0 license.

founded 2 years ago

MODERATORS

[email protected]

Door Update (i.imgur.com)

submitted 1 year ago* (last edited 1 year ago) by [email protected] to c/[email protected]

4 comments fedilink hide all child comments

We had an ugly metal clad solid wood exterior door that leads from a basement family room into our below grade garage. I had redone the floor and trim in the family room and was looking for a way to fancy up the door without having to spend a fortune.

Original door

Took the door off and cleaned it up

Cut 1/2 MDF to size to give the apperance of a 5 panel door

Glued on the panels, and filled and sanded all the edges. Chamfered edges

Primed

Paint added

Rehung- the MDF made an already thick door significantly thicker so I had to spend quite some time finding hardware that would work.

It's been 4 years since this was installed and it's held up perfect. I was worried about the MDF getting dinged, but it has not.

you are viewing a single comment's thread
view the rest of the comments

[–] Waraugh 1 points 1 year ago (1 children)

Thanks for sharing the story and progress. It looks really good. Did you consider routing the edges? I’m not sure if I would have a preference one way over the other, was just curious.

[–] [email protected] 1 points 1 year ago

There is a slight chamfer on the edges that I put on with a hand plane. With MDF I knew I didn't want hard edges since the can get dingged pretty easy. It's held up well so far.