this post was submitted on 03 Jul 2023
4 points (100.0% liked)

Faceting

361 readers
1 users here now

Community for discussing faceting and gemstones.

If you are a cutter, show off your work, provide tips and tricks or ask for advice.

If you don’t cut stones, feel free to ask questions!

No selling of stones, rough or anything else. You can however post links to vendors that you recommend.

founded 2 years ago
MODERATORS
Crylos
4
It isn’t always easy….. (self.faceting)
submitted 2 years ago by Crylos to c/faceting
2 comments fedilink hide all child comments
 

Ok, so I’ve got a commission for a pair of 4mm pyrope garnets for a pair of earrings, and I need to us a specific sized dop. I look at my set and see that the dop I need already has a stone on it…

Then I remember why… this particular topaz I was cutting over a year ago and had nothing but trouble with it, and only got the pavilion partially done. Issues I had with this stone:

  • difficult design
  • popped off the dop, and had to reset and recut
  • started the recut and noticed an inclusion in the center I hadn’t seen before

So, I decided I’m going to recut this with a simple design and finish it regardless of the inclusion.

Got the pavilion cut and polished, started the crown… popped off the dop. FML.

I reset and glued the stone back on, and stepped away for a few days to ignore it and regain my patience. 😉

I’m going to see how this turns out and will post here when it’s done. Wish me luck….

you are viewing a single comment's thread
view the rest of the comments
[–] [email protected] 2 points 2 years ago (1 children)

Oh gosh, I'm horrid at having half finished projects... Now you tell me I can leave stones on a dop for ages? I'm going to have to be militant with myself to avoid hoarding half-done gems. 🤪

Please share before and after photos if you can! I love seeing the difference, it helps me get excited about the few rough I have right now.

(PS my ultra tec will be here late September - it'll be a few months before I can post anything exciting 🥺)

[–] Crylos 2 points 2 years ago

Oh my, don’t think you can just put one to the side. Once it’s in the cutting head you need to finish it. Removing the dop from the cutting head and putting it back may not perfectly align the index.

In my case there is a good chance the stone isn’t perfectly vertical, and I’ll have a asymmetrical stone where the girdle is narrower on one side than the other.