NZ Off topic

367 readers

4 users here now

This community is for NZ discussion about random non-NZ things, or whatever you want! Shitposts, circlejerks, memes, something you found funny, anything goes!*

*except for:

anything against the global instance CoC
anything too controversial (keep it light-hearted)

If you want to have a serious political discussion, take it to [email protected].

founded 1 year ago

MODERATORS

[email protected]

Hard wire a Sureflap cat flap with battery backup? (lemmy.nz)

submitted 10 months ago by [email protected] to c/[email protected]

11 comments fedilink hide all child comments

I've got a Sureflap cat flap operated by 4 AA batteries. It doesn't work well on rechargeables, it seems to need 1.5v batteries.

I'm thinking to hardwire it with battery backup (like a Ups). I'm not very experienced in electronics, are there any off the shelf products I could use? I'm assuming the flap runs at 6v and that I can just attach two cables, one to plus, one to min.

If there are no off the shelve products, any recommendations for what I should buy?

you are viewing a single comment's thread
view the rest of the comments

[–] [email protected] 2 points 10 months ago (1 children)

USB is gonna be 5V, which is lower than 6V, but then if it kinda works on 4x rechargeable, that's probably 4.8V fully charged depending on battery chemistry.

UPS and USB might work.
No clue how much amps that motor pulls when activated, so it's hard to give you a minimum for amps.

[–] [email protected] 2 points 10 months ago* (last edited 10 months ago) (1 children)

I was thinking this usb powered battery replacement which has a 6v option. https://a.aliexpress.com/_m030556

There's no motor, just a click system to unlock / lock the flap. And easiest would be to plug it into a power bank which is also charged at the same time by 220v.

[–] [email protected] 2 points 10 months ago

Right so just an actuator which probably doesn't need much current