this post was submitted on 21 Jun 2023
30 points (100.0% liked)

Aotearoa / New Zealand

1648 readers
12 users here now

Kia ora and welcome to !newzealand, a place to share and discuss anything about Aotearoa in general

Rules:

FAQ ~ NZ Community List ~ Join Matrix chatroom

 

Banner image by Bernard Spragg

Got an idea for next month's banner?

founded 1 year ago
MODERATORS
[email protected]
[email protected]
30
We've got an insulated house, heat it properly, ventilate it, but still see humidity levels of 70%+ in bed rooms. How to fix that? (lemmy.nz)
submitted 1 year ago by [email protected] to c/[email protected]
102 comments fedilink hide all child comments
 

We built a house 7 years ago and it's insulated and has double glazing. I've installed Home Assistant with temp sensors in the bed rooms and seeing 70%+ humidity levels. Temperature is always above 16c

We ventilate it, but still it's 70% in the bedrooms. WHO recommends 40-60%, so we're a bit worried.

Living room is around 55% during the day when we have the heat pump set at 21c.

As it's pretty humid outside I think it's almost impossible to get it lower, but are there any other tips? I don't want to run dehumidifiers. Would an HRV like system help?

you are viewing a single comment's thread
view the rest of the comments
[–] [email protected] 2 points 1 year ago* (last edited 1 year ago) (2 children)

4 year old house, double glazing. We have the heat pump set at 21dg on 24x7 all winter and never really open windows.

Current temps and moisture levels:

If you're worried about moisture I recommend a dehumidifier, those things work wonders and much cheaper than retrofitting ventilation like the other poster mentioned.

I guess it's worth mentioning, we have a tumble drier in the garage so the house doesn't get any moisture from drying clothes.

[–] [email protected] 2 points 1 year ago (1 children)

Thanks. Those numbers are similar to ours. We never really opened windows either, we're aiming to do that daily from now on.

Just bought a dehumidifier. Indeed easiest and cheapest solution.

[–] [email protected] 3 points 1 year ago (1 children)

I'm ok with that humidity to be honest, I am not seeing any mould.

[–] [email protected] 3 points 1 year ago

We only a little bit in certain clothes and in the bottom of our alu window frames.

Still above 60% is apparently not healthy. I'd recommend to look into it.

[–] [email protected] 2 points 1 year ago

A lot of modern heat-pumps have a dehumidifier mode. But likely if they're set to Auto they'll never switch to using it I think.