Ask Electronics

3173 readers

8 users here now

For questions about component-level electronic circuits, tools and equipment.

Rules

1: Be nice.

2: Be on-topic (eg: Electronic, not electrical).

3: No commercial stuff, buying, selling or valuations.

4: Be safe.

founded 1 year ago

MODERATORS

[email protected]

Better LEDs for self built keyboard (self.askelectronics)

submitted 1 year ago by Aduentix to c/[email protected]

5 comments fedilink hide all child comments

I've tried to build a corne chocolate, but I've been facing some issues with the LEDs that they're using. For some reason, they have chosen to use "normal" surface mount LEDs (SK6812MINI) instead of reverse mounting ones with legs (e.g. SK6812MINI-E), and suggest bridging them with solder. See this before and after soldering from the original guide.

So I'm wondering if any of you know about some reverse mount LEDs, that would work on this board. Note that like 6 of them are mounted facing the other way, for "underglow". I'm not really interested in that, but the data lines aren't separate for the backlight and the underglow, so I'd have to bridge with a wire, which is meh.

I know I could modify the PCB design, but I don't feel too confident it will work after me doing so.

I'm open to suggestions :)

you are viewing a single comment's thread
view the rest of the comments

[–] Aduentix 1 points 1 year ago (1 children)

So their sugessted LEDs are mounted like this, right:

To which, this is the pinout.

And this is the pinout for the reverse mount LED:

While true, that the pins are sort of correct when rotated 90° counter-clockwise, they wouldn't line up with the pads on the PCB anymore... sorry if I'm being a bit dumb, but I don't see how this is going to work.

[–] tbe 1 points 1 year ago

Yeah it actually won’t work, I initially thought it would but after having a closer look, it won’t.