micromobility - Ebikes, scooters, longboards: Whatever floats your goat, this is micromobility

2314 readers

23 users here now

Ebikes, bicycles, scooters, skateboards, longboards, eboards, motorcycles, skates, unicycles: Whatever floats your goat, this is all things micromobility!

"Transportation using lightweight vehicles such as bicycles or scooters, especially electric ones that may be borrowed as part of a self-service rental program in which people rent vehicles for short-term use within a town or city.

micromobility is seen as a potential solution to moving people more efficiently around cities"

Feel free to also check out

[email protected]

It's a little sad that we need to actually say this, but:

Don't be an asshole or you will be permanently banned.

Respectful debate is totally OK, criticizing a product is fine, but being verbally abusive will not be tolerated.

Focus on discussing the idea, not attacking the person.

founded 1 year ago

MODERATORS

FartsWithAnAccent

[email protected]

Anyone repaired Ninebot Max G30P front fork bearings? (aussie.zone)

submitted 1 year ago* (last edited 1 year ago) by [email protected] to c/micromobility

7 comments fedilink hide all child comments

A while back, I came off my scooter and damaged the front-fork. I got the fork replaced at the store where I bought it, but ever since there has been a fair amount of float / movement in the steering stem (and no, it is not movement in the folding/locking mechanism as so many YouTube videos indicate).

I finally disassembled it today to investigate, and discovered that the front fork is floating in the steering bearings. The front fork stem diameter is 28.8mm and the steering bearings inner diameter is 30.3mm. So the whole front fork is rattling around inside the steering bearings.

It seems to me that either the shop has installed the wrong fork, or that there is a ring (or similar) missing. Either I need to replace the fork with one with a slightly larger diameter, or the steering bearings need replacing with something of slight smaller diameter, or there is some sort of sleeve that needs to sit over the fork shaft inside the bearing.

Does anyone have any experience with the front-fork / steering bearing repairs on a Ninebot Max G30P? And can confirm what the correct dimensions should be of the front-fork stem and inner steering bearings?

UPDATE: I ended up buying a new steering bearing off of eBay (this one: https://www.ebay.com.au/itm/374858665061?mkcid=16&mkevt=1&mkrid=705-154756-20017-0&ssspo=1wl-oboltaa&sssrc=4429486&ssuid=thrFUY1ySje&var=&widget_ver=artemis&media=COPY).

Turns out the two silver rings (shown in the eBay listing pic) were the bits missing. Adding those to sit inside the top steering bearing… and the scooter feels like it is brand new again!

you are viewing a single comment's thread
view the rest of the comments

[–] [email protected] 2 points 1 year ago (3 children)

Ooh thanks. That looks useful.

[–] [email protected] 2 points 1 year ago (2 children)

You got it! If you need help in putting the ScooterHacking firmware you can ask me, I've done it on mine. Field weakening is incredible.

Another useful website I found is Joey's wiki, and finally Ninebot Max playlist on yt is not bad at all, the repair videos are short but well done (I yt-dlp the whole playlist :D)

Btw I saved your post because mine wobbles a bit, so I might have to look into the same problem in the future (and I already tightened the locking mechanism)

[–] [email protected] 2 points 1 year ago (1 children)

Added an update to the post. Turns out it was two missing rings that are supposed to sit inside the top steering bearing.

Thanks again for your input.

[–] [email protected] 2 points 1 year ago

A pleasure, glad you found the solution and thanks for sharing it! Well done