this post was submitted on 11 Aug 2023
56 points (96.7% liked)

ErgoMechKeyboards

5829 readers
15 users here now

Ergonomic, split and other weird keyboards

Rules

Keep it ergo

Posts must be of/about keyboards that have a clear delineation between the left and right halves of the keyboard, column stagger, or both. This includes one-handed (one half doesn't exist, what clearer delineation is that!?)

i.e. no regular non-split¹ row-stagger and no non-split¹ ortholinear²

¹ split meaning a separation of the halves, whether fixed in place or entirely separate, both are fine.
² ortholinear meaning keys layed out in a grid

No Spam

No excessive posting/"shilling" for commercial purposes. Vendors are permitted to promote their products/services but keep it to a minimum and use the [vendor] flair. Posts that appear to be marketing without being transparent about it will be removed.

No Buy/Sell/Trade

This subreddit is not a marketplace, please post on r/mechmarket or other relevant marketplace.

Some useful links

founded 1 year ago
MODERATORS
 

Hello everyone! I recently open sourced the Kaly42, a cheap split Ergonomic Mechanical Keyboard and, to celebrate the occasion, have decided to tell the story of how I went from a standard mechanical keyboard to the CSTC40 and eventually to designing and building a new keyboard! The files are available here and the video here! If any of that interests you, please check them out, it would mean a lot to me!

you are viewing a single comment's thread
view the rest of the comments
[–] [email protected] 3 points 1 year ago (1 children)

Nice planter pics in the repo!

Can you tell me about the keycaps you're using? They look "pointier" than the low profile choc keycaps I got from MK Ultra.

Also, how was your experience using Ergogen with Blackpill? When I played with it a while back it really only had built-in footprints for Pro Micro.

[–] Dwctor 2 points 1 year ago

I got those keycaps from aliexpress and the choice was purely based on "This is the cheapest I can find", but they are quite ok if you don't mind flat keycaps! I think about 0.2$ per keycap. (and you get free shipping after getting enough of them).

As for Ergogen, sadly I also didn't find any. I imported and used the footprint exclusively from the Kicad PCB stage onwards. It took a bit more of manual work but was quite worth it! Hope someone adds it and the RP controllers eventually, it would be great!