Inspired by Optimum Techs awesome video about the Dan C4 SFX (https://youtu.be/PpENpqI7BiE) I decided to upgrade my PC and try my hand at this whole MiniITX-thing:
HW:
- AMD Ryzen 7 7800X3D (AM5, 4.20 GHz, 8 -Core)
- Noctua NH-D12L (145 mm)
- Corsair Vengeance (2 x 16GB, 6400 MHz, DDR5-RAM, DIMM) which kinda bit me in the arse
- ASUS ROG STRIX B650E-I GAMING WIFI
- Gigabyte AORUS GeForce RTX 3080 MASTER 10G LHR
- Samsung 990 Pro 1TB for OS und apps
- WD Black SN850X 4TB for games
- Lian-Li SP850 SFX power supply
- Dan Cases C4-SFX
I admit, I was quite intimidated by the prospect of building in such a small case, but the C4 SFX makes it easy.
Some tipps for first time builders like me:
- Check your graphic card measurements carefully against the numbers on the website for this case:https://www.dan-cases.com/c4sfx_spec.html
- Don't be afraid to use a bit of force when running the power supply cables. Don't destroy the plugs but you can push a bit to make them fit.
- Best use only NVMe-drives. The less you try to shove into the case the better.
For those who are a bit unsure I recommend the video from Optimum Tech. While it's not a detailed step-by-step guide it does cover most of what you should know. Sure made my day easier and gave me some confidence.
Those are the same temps I'm getting with a watercooler. :)
Ugh, I had a similar issue. Over clocked, stress tested, had an issue, and had to CMOS reset because of a noboot. It was before vacation and I was panicking lol.