We need to start to fill up lemmy :) Can you solve this issue?
My HEVO (Hypercube Evolution), now 5 years old started to have very weird banding.
It has a Bowden BMG Extruder and a E3D V6 printhead with CHT-Nozzle. MKS Robin with TMC2209 and Klipper.
Benchy is ABS, lower one is HIPS. Printed at 230°/105° bed. part cooling fan off.
I took apart and cleaned the extruder. The gears look intact and i can move the extruder by hand without binding. I found the E3D V6 was loose. I retightened it, which didn't solve the issue.
I'll spend a beer to the one that solves this issue ;)
Edit: Found the Issue: hotend not hot enough.
You found solution?
Do PID tuning if you changed anything or you might have wrong or unstable temps. I dont print much ABS but I think its safe to use part cooling fan at lower speeds. Picture looks like you are printing too hot
Hey thanks :) Yes I found it. It seems like I printed not hot enough. I am now printing at 250° without issues anymore.