this post was submitted on 20 Feb 2025
181 points (99.5% liked)
Asklemmy
45214 readers
1305 users here now
A loosely moderated place to ask open-ended questions
If your post meets the following criteria, it's welcome here!
- Open-ended question
- Not offensive: at this point, we do not have the bandwidth to moderate overtly political discussions. Assume best intent and be excellent to each other.
- Not regarding using or support for Lemmy: context, see the list of support communities and tools for finding communities below
- Not ad nauseam inducing: please make sure it is a question that would be new to most members
- An actual topic of discussion
Looking for support?
Looking for a community?
- Lemmyverse: community search
- sub.rehab: maps old subreddits to fediverse options, marks official as such
- [email protected]: a community for finding communities
~Icon~ ~by~ ~@Double_[email protected]~
founded 5 years ago
MODERATORS
you are viewing a single comment's thread
view the rest of the comments
view the rest of the comments
I've always thought that most toilet paper holders are over engineered. You don't need a little springy rod between 2 posts, you just need an L-shaped bar with the short end screwed to the wall and maybe a little knob on the end of the long side to keep the roll from sliding off. And it's not that the spring style is especially difficult to use or prone to failure or anything, it just seems like a no-brainer to me to use a one-piece holder with no moving parts instead of one that has at least 4 parts (the base, 2 halves of the roller, and a spring) I'm seeing more of that style around these days, which I appreciate.
Stove vent hoods that don't actually vent outside are fucking stupid. My over the range microwave basically just takes smoke from my stove and blows it back out over my head almost directly at the smoke detector.
I've frequently run into shelves, mounting brackets, etc. that seem to totally disregard stud spacing. We got one of those fancy Samsung frame TV's a while back, to get it to sit so flush to the wall it has its own special mounting brackets, 2 little plates with sort of a modified keyhole slot that you slot 2 little knobs on the back of the TV into. It's actually not a half bad way to mount a TV, probably one of the easier TV wall mounts I've ever personally used, the tv itself is actually pretty damn lightweight (because they moved all the heavy electronics into a separate box you need to hide somewhere) but still I wanted to make sure my fancy TV wouldn't fall off the wall, so I wanted to mount it to the studs, but of course the spacing of the brackets doesn't allow that option. I was able to bolt one side a stud but I had to get some toggle bolts for the other side. I'm pretty sure the whole TV is well within the rated weight capacity of one of those toggle bolts in drywall, let alone 2 in drywall and 2 in a stud, but still, it feels like a dumb design choice. (It's possible that other sizes or newer models do allow for mounting entirely to studs, the size and model I got didn't)
I helped a friend replace the wax ring on his toilet recently with one of the newer style rubber gaskets, which as it turns out made the toilet sit imperceptibly higher, which meant that the bolts holding it down were no longer quite long enough to screw the nut onto to tighten it down. With a quick trip to ace hardware and a minute perusing my options, I settled on some Danco zero cut bolts, and I definitely think that is a far superior design to the standard bolts that are probably holding down damn-near every toilet you've ever used.
On the subject of toilets, I can't think of any particularly good reason for the tank to be a separate piece from the rest of the throne like on most toilets. The gasket and bolts there just add more places for something to start leaking. It's probably an ease of manufacturing thing, but we have the technology to make one piece toilets now, the two piece style should be obsolete.
Some places you can’t (for whatever reason) install a proper ventilator. Then these with carbon filter will remove some things. But yes, they are far inferior to the full blow vents.