this post was submitted on 04 Feb 2025
32 points (97.1% liked)

Astrophotography

1979 readers
6 users here now

Welcome to !astrophotography!

We are Lemmy's dedicated astrophotography community!

If you want to see or post pictures of space taken by amateurs using amateur level equipment, this is the place for you!

If you want to learn more about taking astro photos, check out our wiki or our discord!

Please read the rules before you post! It is your responsibility to be aware of current rules. Failure to be aware of current rules may result in your post being removed without warning at moderator discretion.

Rules




If your post is removed, try reposting with a different title. Don't hesitate to message the mods if you still have questions!


founded 2 years ago
MODERATORS
 

My second (and first successful) try of the orion nebula. Any advice for editing out the noise and these stripes? What are these?

Camera: Panasonic Lumix G85 Lens: H-FSA100300 (100-300mm f4-5.6) Settings: f6.4, ISO 6400, 5"

1020 pics at 5s each + calibration frames

Total exposure: 85 minutes / 1.4 hours

you are viewing a single comment's thread
view the rest of the comments
[–] bistdunarrisch 2 points 2 days ago (1 children)

The stripes are called walking noise/ pattern and often show up when not using a tracking mount and not using dithering.

Because not every pixel of your camera captures signal exactly equally bright you‘ll see this difference along the movement of the sky as it gets accumulated with every subframe. The only way to get rid of it is to vary the pixels for each part of the image after each exposure. This can be done by moving the camera slightly after each shot. This process is called dithering.

With good calibration frames the pattern can by minimized very slightly. Other than that the only real option for processing I can think of is to hide the pattern by not stretching the dark ares too much.

Other than that great image!

[–] [email protected] 1 points 2 days ago

I did use a tracking mount, but of course I didn‘t move the camera. I also used darks, biases and flats for calibration.

I think I‘ll just remove this in post as best as I can in the future.