Ask Electronics

3173 readers

2 users here now

For questions about component-level electronic circuits, tools and equipment.

Rules

1: Be nice.

2: Be on-topic (eg: Electronic, not electrical).

3: No commercial stuff, buying, selling or valuations.

4: Be safe.

founded 2 years ago

MODERATORS

[email protected]

What's a good method for a non-technical person to short the terminals of two 0402 resistors ~1mm apart? (lemmy.world)

submitted 2 months ago by ch00f to c/[email protected]

27 comments fedilink hide all child comments

I'm working on a mod kit for a popular item, but my target audience isn't likely to have a soldering iron. The majority of the project connects to an exposed ribbon connector, but I need to short two terminals to force a power supply on.

Any ideas on a method I could provide for people who can't solder? Maybe a strip of copper tape?

you are viewing a single comment's thread
view the rest of the comments

[–] bangupjobasusual 3 points 2 months ago (1 children)

Design a plastic housing for the connector that puts pressure on short while the ribbon is plugged in. Put a short in the plastic housing.

Making some assumptions here but…

[–] ch00f 2 points 2 months ago (1 children)

Good idea, but the ribbon connects to the other side of the connector.

[–] bangupjobasusual 1 points 2 months ago

That’s still how I’d do it, just make the plastic bit reach over those other resistors. I’d 3d print the bracket.