networking

2779 readers

3 users here now

Community for discussing enterprise networks and the ensuing chaos that comes after inheriting or building one.

founded 1 year ago

MODERATORS

[email protected]

ASUS N66U with VPN Client on WAN interface, disable traffic when VPN server connection is down (self.networking)

submitted 1 month ago by jaybone to c/[email protected]

8 comments fedilink hide all child comments

I have an ASUS N66U

I have configured the WAN interface to use a VPN Client to connect to a 3rd party VPN Server, so that all NAT LAN connected device traffic is routed through the 3rd party VPN server.

But if the 3rd party VPN server goes down, or the connection is otherwise lost or broken, the Asus N66U will route directly from the WAN connection using e.g. my ISP.

How can I stop my Asus N66U from routing any traffic on the WAN port if the VPN connection is down?

all 9 comments

sorted by: hot top controversial new old

[–] [email protected] 2 points 1 month ago (1 children)

At the very least you will need to allow it to route VPN traffic on that port, otherwise your VPN connection won't work and/or won't be re-established.

[–] jaybone 1 points 1 month ago (1 children)

I want it to drop all connections if it is not on the vpn.

[–] [email protected] 1 points 1 month ago (1 children)

It can never be on the VPN if the outer, encrypted VPN packets are not allowed on the connection. I mention it because it is one of the more complex bits to handle about your requirement, depending on if you always connect to the same IP via VPN or need to connect to a dynamic peer, possibly one you need to look up via DNS first.

[–] jaybone 1 points 1 month ago (1 children)

The router will need to look up the IP address of the vpn server using DNS. None of the other clients on the LAN should be doing that. Point is I only want the other client devices to have access to the outside world if the VPN is connected. If it is somehow disconnected, I don’t want those other LAN client devices to access the internet.

[–] [email protected] 1 points 1 month ago

Ah, so you don't care about software running locally on the router being able to access things without the VPN but do care if routed traffic does? You might also want to consider if the router offers services like a caching DNS server, a HTTP or SOCKS proxy,... that might look like local traffic to the network layer because a local process initiates connections at the instruction of some other system.

[–] [email protected] 2 points 1 month ago* (last edited 1 month ago) (1 children)

I accomplished this by setting a firewall rule to block all outbound traffic on that interface except to the VPN and the LAN.

[–] jaybone 1 points 1 month ago

Thanks! That makes sense. I’ll give this a try.

[–] jaybone 1 points 2 weeks ago

To answer my own question, in the hope that maybe it helps someone else...

So I tried

openwrt
dd-wrt
tomato
merlin

Finally I found Merlin. Merlin let me configure OpenVPN with a .ovpn file.

There is an option "Redirect Internet Traffic" you can set to "Policy Rules"

You can use CIDR notation to specify all client IPs on the subnet, e.g. 192.168.1.0/24, destination 0.0.0.0

And you can select "Block routed clients if tunnel goes down"

Also search for: killswitch