CAD

262 readers

4 users here now

A general discussion of Computer Aided Design and Drafting software and the industries and hobbies surrounding them. Follow lemmy.world rules and don't be a jerk.

founded 7 months ago

MODERATORS

wjrii

Newbie Q -- Best Design Practices?? (lemmy.zip)

submitted 3 months ago by [email protected] to c/cad

1 comments fedilink hide all child comments

I have become fairly proficient with OnShape thanks to their free courses and while I am fairly competent with the controls and achieving something serviceable, I would really love to get into learning more about CAD/product design best practices.

There's probably a class or two in freshman engineering that gets into this stuff but I am mostly picking things up through trial and error. I am mostly just poorly imitating stuff I have seen after a few decades of taking things apart and occasionally putting them back together.

Like: How should I design two parts to fit together optimally? How should I decide what kind of hardware and why, or where? Screws? Bolts? Glue? Holes, where and why? What are some things to look out for when designing universal parts?

Also, are there any good references for working with PLA? I have a good sense of what things will look like after slicing and have got pretty good at making things that will print well and be strong but I could always use more references.

top 1 comments

sorted by: hot top controversial new old

[–] [email protected] 3 points 3 months ago

My engineering degree briefly touched on all those things, but the tldr was "experience".

If you have a 3d printer, you can trial and error and iterate fairly rapidly, which is often the best thing to do (albeit slightly wasteful)

I'm pretty sure you can make assemblies in OnShape, and they should automatically update as you change the base part. So I use that if I want to check the fitment. But when you print it won't be precise, so you may need to add gaps. I add 0.2 mm, but it depends on your printers capability.