this post was submitted on 11 Nov 2024
7 points (88.9% liked)
Electronics
2045 readers
71 users here now
Projects, pictures, industry discussions and news about electronic engineering & component-level electronic circuits.
Rules
1: Be nice.
2: Be on-topic (eg: Electronic, not electrical).
3: No commercial stuff, buying, selling or valuations.
4: No circuit design or repair, tools or component questions.
5: No excessively promoting your own sites, social media, videos etc.
Ask questions in https://discuss.tchncs.de/c/askelectronics
founded 1 year ago
MODERATORS
you are viewing a single comment's thread
view the rest of the comments
view the rest of the comments
When you buy components, buy a bag of them. Good for when you let the smoke out of one, and you can have several projects on the go at a time.
@RandomUser @Mammothmothman
Problem with doing that is sooner or later you are going to end up with piles of stuff like esp12f's and such. I have more packaging tubes of ATtiny85's than I will ever use.
A related tip for components with lots of pins, and especially the slightly-expensive ones like microcontrollers: use sockets instead of soldering them to the board directly. That way you're less likely to overheat them with the soldering iron, and also when you do let the magic smoke out of one it's a lot easier to replace.
When I started there was lots of smoke 😀 it's true that you can easily accumulate random stuff, but I still think it's better to have spares of the things I use than risking running out and waiting for a delivery. Maybe I'm just disorganised.
These days I mostly apply it to passives. Especially small ones. 0201 are a pain to work with, liable to blow away if you look at them wrong. 0402s are better, but still easy to lose. But if I'm trying to keep size & weight down I tend to need the tiny parts, so it's easier to design to use common values as much as possible and spend $30-40 for a reel of 10,000 of them. I doubt I'll ever run out of 10kΩ resistors!
@RandomUser
Oh I have spares, probably spares for the spares too. I seldom had smoke but do remember hooking electrolytic caps backwards a few times. The bang will get your attention.
They do not smoke but I found if you plug an ATtiny85 backwards they will burn your hand when you attempt to remove them.