this post was submitted on 07 Sep 2024
26 points (100.0% liked)

Astrophotography

1816 readers
1 users here now

Welcome to !astrophotography!

We are Lemmy's dedicated astrophotography community!

If you want to see or post pictures of space taken by amateurs using amateur level equipment, this is the place for you!

If you want to learn more about taking astro photos, check out our wiki or our discord!

Please read the rules before you post! It is your responsibility to be aware of current rules. Failure to be aware of current rules may result in your post being removed without warning at moderator discretion.

Rules




If your post is removed, try reposting with a different title. Don't hesitate to message the mods if you still have questions!


founded 1 year ago
MODERATORS
 
you are viewing a single comment's thread
view the rest of the comments
[–] lefty7283 4 points 2 months ago (2 children)

NGC 4490 is a galaxy colliding with the smaller NGC 4485 galaxy, and both are about 25 million light years away. This image was taken with a monochrome camera through filters for luminance (all visible light), red, green, blue, and Hydrogen-alpha (656nm), which were combined into a color image. The Hydrogen-alpha was combined with red (described below) to make the HaLRGB image. The pink Ha regions are star forming nebulae within the galaxies. This got cropped out of the final pic, but I ended getting some gorgeous diffraction spikes on this star near the edge of the full FOV

Places where I host my other images:

Flickr | Instagram


Equipment:

  • TPO 6" F/4 Imaging Newtonian

  • Orion Sirius EQ-G

  • ZWO ASI1600MM-Pro

  • Skywatcher Quattro Coma Corrector

  • ZWO EFW 8x1.25"/31mm

  • Astronomik LRGB+CLS Filters- 31mm

  • Astrodon 31mm Ha 5nm, Oiii 3nm, Sii 5nm

  • Agena 50mm Deluxe Straight-Through Guide Scope

  • ZWO ASI-120MC for guiding

  • Moonlite Autofocuser

Acquisition: 27 hours 37 minutes (Camera at half Unity Gain, -15°C)

  • Ha - 128x360"

  • Lum - 464x60"

  • Red - 152x60"

  • Green - 150x60"

  • Blue - 123x60"

  • Flats- 30 per filter

  • 24 JimmyFlats per broadband filter

Capture Software:

PixInsight Processing:

  • BatchPreProcessing (with premade JimmyFlats)

  • StarAlignment

  • Blink

  • ImageIntegration

  • DrizzleIntegration (2x, Var β=1.5)

  • DynamicCrop

  • DynamicBackgroundExtraction

duplicated each image and removed stars via StarXterminator. Ran DBE to generate background model. model subtracted from original pic using the following PixelMath (math courtesy of /u/jimmythechicken1)

$T * med(model) / model

Luminance:

  • BlurXTerminator

  • ArcsinhStretch + histogramtransformation to bring nonlinear

RGB:

  • ChannelCombinaiton to combine monochrome R, G, B stacks into color image

  • SpectroPhotometricColorCalibration

  • BlurXTerminator (correct only mode)

  • HSV Repair

making clean Ha

loosely following this guide

This basically subtracts any broadband signal from the Ha pic, leaving only the Ha emission, which is then combined in with the red and a little bit of the blue channels

  • PixelMath to isolate just Ha

Ha-Q * (Red-med (Red)), Q=0.75

  • PixelMath to add Ha into RGB image

Red = $T+B*(Ha_Clean - med(Ha_Clean))

Green = $T

Blue = $T+B0.2(Ha_Clean - med(Ha_Clean))

B variable = 0.6 (this controls how strongly the Ha is added)

Nonlinear

  • ArcsinhStretch + histogramtransformation to bring HaRGB image nonlinear

  • MLT for large scale chrominance noise reduction

  • shitloads of curve transformations to adjust lightness, contrast, saturation, etc (with various luminance and star masks)

  • slight SCNR to remove some greens

  • LRGBCombination with stretched Luminance

  • DeepSNR

  • more curves

  • ColorSaturation to slightly desaturate the Ha regions (they were very pink compared to the rest of the galaxy

  • slight noisexterminator

  • LocalHistogramEqualization

  • even more curves

  • Resample to 75%

  • DynamicCrop onto just the galaxy

  • annotation

[–] Gnomie 3 points 2 months ago (1 children)

I’ll say it again, thanks for all the details.

[–] bistdunarrisch 1 points 2 months ago

I couldn’t agree more, thank you for sharing so much information!