3DPrinting

15631 readers

641 users here now

3DPrinting is a place where makers of all skill levels and walks of life can learn about and discuss 3D printing and development of 3D printed parts and devices.

The r/functionalprint community is now located at: [email protected] or [email protected]

There are CAD communities available at: [email protected] or [email protected]

Rules

No bigotry - including racism, sexism, ableism, homophobia, transphobia, or xenophobia. Code of Conduct.
Be respectful, especially when disagreeing. Everyone should feel welcome here.
No porn (NSFW prints are acceptable but must be marked NSFW)
No Ads / Spamming / Guerrilla Marketing
Do not create links to reddit
If you see an issue please flag it
No guns
No injury gore posts

If you need an easy way to host pictures, https://catbox.moe may be an option. Be ethical about what you post and donate if you are able or use this a lot. It is just an individual hosting content, not a company. The image embedding syntax for Lemmy is ![](URL)

Moderation policy: Light, mostly invisible

founded 1 year ago

MODERATORS

Possible over extrusion, any advice appreciated! (i.imgur.com)

submitted 1 year ago* (last edited 1 year ago) by Prismo to c/3dprinting

8 comments fedilink hide all child comments

https://i.imgur.com/yzJg1ne.jpg

https://i.imgur.com/IgVP7Fj.jpg

Any ideas on this new issue only affecting one of my printers, only seems to be on the bottom layers of a base mode print. The layers that are not done as one continuous spiral. Photos are before and after, ignore the banding on the before! (Thats another issue I have fixed)

Can’t figure this one out, driving me mad as I have orders to fulfil

Solved:

So a combination of three changes finally got me back the correct result.

Changed the nozzle for a brand new one, that helped a lot but still had a fee issues.
Remeasured my extrusion amount and recalibrated the e-steps, they had gone quite a way out.
Reduced the temp by 10°C apart from the first layer.

you are viewing a single comment's thread
view the rest of the comments

[–] [email protected] 4 points 1 year ago (2 children)

The last time I had overextrusion was due to overuse of matte filament (abrasive). The hole of the nozzle was too large. Since you only have this issue on one of your printers, have you checked the nozzle?

[–] Prismo 2 points 1 year ago

So a combination of three changes finally got me back the correct result.

Changed the nozzle for a brand new one, that helped a lot but still had a fee issues.
Remeasured my extrusion amount and recalibrated the e-steps, they had gone quite a way out.
Reduced the temp by 10°C apart from the first layer.

Thanks for your help!

load more comments (1 replies)